A Guide to Pool Cleaning and Maintenance

Posted on

A swimming pool needs regular pool cleaning and maintenance to be at its best. Understanding the basic parts of your pool and their roles helps keeps everything running smoothly and makes it easier to solve problems when they emerge. The following are the guiding principles for keeping your swimming pool sparkling clean and in good condition:

Check pool water

Keep the pool water clean, clear, and balanced to protect children and adults from contaminants and pollutants. The water level needs to be right at the center level of your pool, skimmer for maximum results and performance. If the water level is low, it can run the pump dry and burn it up, and if it is too high, the skimmer door will not function properly. Pool cleaning in Austin, Texas and maintenance can be done through hand vacuuming, employing a pool cleaner to do the cleaning and required maintenance or by an automatic mechanical pool cleaner.

Contact Us

Check pool chemicals

The chemical balance of the pool is made up of, pH 68%, total alkalinity 16% and calcium hardness 16%. It is important to monitor the chlorine and pH levels once or twice a week. The pH should be kept between 7.2 and 7.8; incorrect pH can affect skin and eyes and can reduce the effectiveness of chlorine. Pool water can be taken to a laboratory to test calcium hardness levels since a low level of dissolved calcium in pool water can corrode pool equipment.

Check chlorination

Chlorine is used by most owners to keep the pool water clean and in balance, but there are other alternative sanitizers such as bromine, ozone gas, or ionization. Chlorine disinfects your pool water to control germs and microorganisms, algae, and organic matter. There are different methods of maintaining proper chlorine levels in the pool. These are by use of manual chlorination, salt chlorinator, and liquid chemical feeder.

Clean out skimmer baskets

The skimmer basket should be cleaned weekly. It skims the surface of the pool before debris, and other contaminants become saturated and move down to the bottom of the pool. It is necessary to open up the access panel on the deck and dump the garbage from the basket as needed. Maintaining the surfaces in good condition and clear of mold, algae, and debris will keep your pool clean and safe.

Clean pool filters system

It is important to clean the filter as many times as possible. A Pool filter cleans the dirt and other contaminants from swimming pool water, and the pool pump keeps the pool water flowing. Without a working filter system, the swimming pool will be cloudy and contaminated. Frequent backwashing your filter is a key component to good pool water circulation.

Check pool heating

Pool heating during cold climate gives you the chance to swim the whole year. The best heating method selection will be determined by where you reside, your budget, and how you use your pool. Correct water temperature is about 25 degrees Celsius; there are different methods of pool heating such as solar heating, gas heating, and electric heating.

Lastly, regular Austin pool cleaning and maintenance are important; they help keep the water safe for you and your family or your clients.